Setting the base station via the handset
Activating/deactivating music on hold
¢
§Menu§
Music on hold
Activating/deactivating repeater mode
With a repeater you can increase the range and signal strength of your base station.
You will need to activate repeater mode. This will terminate any calls being made
via the base station at that time.
Preconditions:
u
A repeater is registered with the base station.
u
Eco mode is deactivated (
¢
§Menu§
Repeater Mode
§OK§
Please note
Repeater support and Eco mode (
functions cannot be used at the same time.
Setting default line
You can set whether you want to make calls via VoIP or the fixed line network as
standard.
Please note
The default line is only relevant when dialling numbers that are not subject to dial-
ling plans (
¢
§Menu§
IP / Fixed Line
When making calls:
¤
Briefly press the talk key c if you want to make a call via this default line.
¤
Press and hold the talk key c if you want to make the call via the other con-
nection type.
ú For how to adjust the setting on the Web configurator,
100
¢
Settings
Base
§OK§
Select and press
£
¢
¢
Settings
Base
§OK§
Select and press
Press the display key to confirm the security prompt.
£
Page
140) and are entered without a line suffix (
¢
¢
Settings
Base
§OK§
Select and press
to activate or deactivate the hold music (‰ = on).
Page
81).
Additional Features
(‰ = on).
£
Page
81) cancel each other out, i.e. both
¢
Telephony
Default Line Type
(‰ = on).
£
Page
39).
£
Page
136.