Turning The Alc (Auto Level Control) On And Off; Setting The Microphone Sensitivity (Mic Sens) - Yamaha POCKETRAK W24 Reference Manual

Turning the ALC (Auto Level Control) on and off

Note:
· You can turn the ALC function on or off when recording audio to folders A–D.
• Turning the ALC function on
Slide the [ALC] switch located on the side panel of the
unit to "ON."
The recording level will automatically be adjusted in
response to the input level.
• Turning the ALC function off
Slide the [ALC] switch (located on the side panel of the
unit) to "OFF."
You can change the recording level in increments (Refer
to the Owner's Manual).
Note:
· You cannot adjust the recording level when you are recording audio from a connected
external device (see

Setting the microphone sensitivity (MIC SENS)

You can set the microphone sensitivity level to high or low to accommodate the recording
environment.
• If the volume level of the recording source is too low:
Slide the [MIC SENS] switch (located on the side panel) to [HIGH].
• If the volume level of the recording source is too high:
Slide the [MIC SENS] switch (located on the side panel) to [LOW].
The indicator displayed in the upper right of the LCD:
When the [MIC SENS] switch is set to [HIGH]:
When the [MIC SENS] switch is set to [LOW]:
POCKETRAK W24 Reference Manual
page 10).
PCM
A
091101_1746.WAV
L
R
0:00:00
PCM
A
091101_1746.WAV
L
R
0:00:00
H
L
3
Recording Settings
ALC ON
AUTO
44.1K 16bit
L
7/7
0:03
ALC OFF
(The recording level
will be displayed.)
40
44.1K 16bit
L
7/7
0:03
17