Installing The Configuration Utility - D-Link AirPlus DWL-520+ Manual

•
Click Finish to complete
the installation

Installing the Configuration Utility

•
Insert the Driver CD into the CD-ROM drive. The Autorun program
will start, showing you the screen below.
•
Click on Install Configuration
Utility
•
If the Autorun program does not
appear, go to Start > Run > type
in D:\Setup.exe, where D
represents the CD-ROM drive.
Connecting to the Wireless Network
Once you have the DWL-520+ properly installed, you will see the icon shown
here.
•
Right-click on the icon in the task bar.
•
Select View Available
Wireless Networks
Note: If View Available Wireless Networks is not shown,
Fig. 5.6
Fig. 5.7
Fig. 5.9
please restart the computer.
14
D-Link AirPlus DWL-520+ Wireless PCI Adapter
Fig. 5.8