D-Link AirPlus G+ DI-824VUP+ Manual page 111

Frequently Asked Questions (continued)
How can I setup my DI-824VUP+ to work with a cable modem
connection?
(i.e. Cox, Adelphia, Rogers, Roadrunner, Charter, and Comcast).
Note: Please configure the router with the computer that was last connected directly
to the cable modem.
Step 1
Log into the Web based configuration by typing in the IP Address of the router
(default:192.168.0.1) in your web browser. The username is admin (all lowercase) and
the password is blank (nothing).
Step 2
Click the Home tab and click the
WAN button. Dynamic IP address is the default
value, however, if Dynamic IP address is not
selected as the WAN type, select Dynamic IP
address by clicking on the radio button. Click
Clone Mac address. Click on Apply and then
Continue to save the changes.
Dynamic Cable connection
+
111