Advertisement
Operational Features
3D Projection Lens Unit
Attaching the 3D projection lens unit* to its lens mount,
the SRX-R320P can deliver crisp 3D images** to screens up
to 50 feet (15 meters)*** in width at 4.5 ft-L brightness.
It allows full 2K resolution for the left and right eyes
simultaneously, resulting in a high-brightness, high-quality
stereoscopic cinema presentation that offers more faithful
reproduction of motion in 3D.
* For detailed information on the 3D projection lens units, please contact
your nearest Sony office.
** To produce 3D images on a screen, 3D filters available from a 3D system
integrator are required. For detailed information on the 3D filters, please
contact your nearest Sony office.
*** Screens up to 50 feet (15 meters) wide are supported, when 3D images are
presented in Side Masking mode. When they are presented in Top-bottom
Masking mode, screens up to 40 feet (12 meters) wide are supported.
For detailed information on supported screen sizes, please contact your
nearest Sony office.
SRX-R320P with 3D projection lens unit attached
Anamorphic Lens
When projecting digital cinema content created in the
CinemaScope format (4096 x 1716 pixels), the SRX-R320P
cannot use all of the 4096 x 2160 pixels available for the
4K SXRD device. To improve this inefficiency, the optional
LKRL-A001 Anamorphic Lens with Lens Changer Unit * was
developed. When CinemaScope images (4096 x 1716 pixels)
are input, the SRX-R320P extends them in a longitudinal
direction via the projector's image-processing function,
which effectively uses all the pixels of the SXRD device. The
LKRL-A001 attached** in front of the projector's lens extends
6
the images in a transverse direction, so that the aspect ratio
of the images projected on a screen can be restored to its
original 2.39:1. This can increase the brightness level of the
images on the screen by approximately 20%, allowing for the
projector to provide a high brightness of 14 ft-L on screens up
to 70 feet (22 meters) wide***.
The LKRL-A001 includes a lens-changer function that can
set the anamorphic lens not to be in use manually. This
function allows for the SRX-R320P to accept digital cinema
content created in the Flat format (3996 x 2160 pixels),
without dismounting the LKRL-A001 unit from the projector.
SRX-R320P Projector
4096 Pixels
Digital Cinema Content
in CinemaScope Format
* The LKRL-A001 supports the LKRL-Z214, LKRL-Z219, LKRL-Z117, and LKRL-Z119
optional lenses. (The LKRL-Z211 is not supported.)
** To attach the LKRL-A001 to the projector, lens support stays are required.
For detailed information, please contact your nearest Sony office.
*** The brightness level may vary depending on portglass and screen conditions.
SRX-R320P with LKRL-A001 attached;
Anamorphic lens not in use
4096 Pixels
4K SXRD Device
LKRL-A001
CinemaScope Image on Screen
(aspect ratio of 2.39 :1 )
Advertisement
