Siemens Dishwasher Instructions For Use Manual page 17

Switching the salt refill
indicator / water softening
system off and on
Close the door
Rotate the programme selector
from the 12 o'clock position by one
notch to the left.
Switch on main switch
down for at least 3 sec.
The digital display
current set hardness value and the salt
refill indicator
6
(hardness value has been set to 4
at the factory).
To change the setting: Rotate the
programme selector
You can select a set value between
0 and 7 according to the hardness
of your water.
Switch off the main switch
The chosen setting has now been
stored.
Note
If you use the detergent and rinse aid
separately or switch from combined
detergents to standard cleaning products,
ensure that the rinse aid refill indicator has
been switched on and the water softening
system has been set to the correct water
hardness.
3
and hold
1
indicates the
8
flashes
.
3
.
1
en
17