Removing The Cabinets - Sony AC-DN2B Maintenance Manual

1-4. Removing the Cabinets

1. Remove the four screws (B3 x 6) securing the BKW-
L601 and loosen the two screws (PSW3 x 8).
BKW-L601
PSW3 x 8
2. Remove the four screws (PSW3 x 8) and remove the
upper case.
3. Remove the two screws (B3 x 6) securing the shield plate.
PSW3 x 8
Upper case
B3 x 6
AC-DN2B
B3 x 6
B3 x 6
PSW3 x 8
Shield plate
4. Remove the screw securing the earth wire and discon-
nect the harnesses from the connector (CN1) on the
main board.
5. Disconnect the harness from the connectors (CN252,
CN253) on the SUB02 board.
SUB 02 board
CN253
CN252
Main board
6. Assemble the parts in reverse order of the disassem-
bling procedure.
1-4. Removing the Cabinets
SMP
4 x 8
CN1
Earth wire
1-3 (E)