Intercom Call - Panasonic KX-TDA100 Features Manual

1.5 Making Call Features
1.5.3

Intercom Call

Description
An extension user can call another extension user.
Conditions
• Extension Number/Name Assignment
Extension numbers (→ Extension Number [003]) and names (→ Extension Name [004]) are assigned
to all extensions. The assigned number and name of the other extension are shown on display PTs
during intercom calls.
• DSS Button
It is possible to call another extension by simply pressing the corresponding Direct Station Selection
(DSS) button. Any flexible button can be customized as a DSS button.
• Call Directory—Extension Dialing
Display proprietary telephone (PT) users can make a call by selecting stored names on the display.
• Alternate Receiving—Ring/Voice
A PT user can select to receive intercom calls by ring tone or by voice, through personal programming
(Alternate Receiving—Ring/Voice). If a user selects voice-calling, the calling party talks to the user
immediately after a confirmation tone. Denying voice-calling can also be selected.
• Alternate Calling—Ring/Voice
A caller can change the called party's preset call receiving method (ring tone or voice). By doing so,
ring-calling is switched to voice-calling, or vice versa, at the called party. The called party may deny
voice-calling.
• Tone after Dialing
After dialing an extension number, a user will hear one of the following:
Type
Ringback Tone
Confirmation Tone
Busy Tone
DND Tone
Feature References
1.18.2 Flexible Buttons
Operation References
1.2.1 Basic Calling
1.2.5 Alternate Calling—Ring/Voice
1.11.2 Directories
3.1.2 Settings on the Programming Mode
64 Feature Guide
Indicates the called party is being called.
Indicates the called party has set voice-calling.
Indicates the called party is busy.
Indicates the called party has set DND.
Description