Table of Contents
Advertisement
Table 4-4
Pop-up Menu: External Volumes, Volume Operation Window
Pop-up Menu
Mapping Path Information
LDEV Information
Delete Volume
Disconnect Volume
Check Paths & Restore
Volume
Change Cache Mode
Inflow Control
Right-click a row in the Cross-subsystem Paths (at the bottom of the
window) to perform the following operations from the pop-up menu.
Table 4-5
Pop-up Menu: Cross-Subsystem Paths, Volume Operation
Window
Pop-up menu
Configure Cross-Subsystem
Paths
Using the Universal Volume Manager GUI
Hitachi Universal Storage Platform V/VM Universal Volume Manager User's Guide
Displays the Mapping Path Information dialog box. This dialog box
allows you to refer to the list of the mapping paths set to the selected
external volume.
Displays the LDEV Information dialog box. This dialog box allows you
to refer to the emulation type and the capacity of the selected external
volume.
Cancels the mapping of the selected external volume.
Disconnects the selected external volume.
Reconnects the selected external volume.
Changes the cache mode set to the selected external volume.
Allows you to select whether to stop writing to the cache memory
when it is impossible to write to the selected external volume.
Displays the Configure Cross-subsystem Paths dialog box. This dialog
box allows you to add and delete cross-subsystem paths, and also
change the priority of the selected cross-subsystem path.
Description
Description
4-9
Advertisement
Table of Contents
