Table of Contents
Advertisement
Set External Volume Parameter Dialog Box
The Set External Volume Parameter dialog box allows you to set the external
volume parameter. The Set External Volume Parameter dialog box is displayed
when you right-click the external volume in the Add Volume dialog box and
click the Set External Volume Parameter in the pop-up menu.
Figure 5-3
The Set External Volume Parameter dialog box consists of:
•
ExG (1-16384)
Group number of the connected external volume. You need to specify the
number using decimal numbers from 1 to 16384. "E" displayed outside of
the text box is the capital letter of the external volume group.
•
Emulation Type
You can select the emulation type of the mapped external volume from the
drop-down list.
If you want to map the external volume as an open system volume, you
need to first decide the emulation type for the mapped volume, OPEN-V or
other than OPEN-V. If you want to map the external volume as an open
system volume with the emulation type other than OPEN-V, select the
Except OPEN-V check box.
– As you clear the Except OPEN-V check box, OPEN-V and available
mainframe emulation types are displayed in the drop-down list.
– As you select the Except OPEN-V check box, the emulation types for
the open system other than OPEN-V are also displayed in the drop-
down list.
5-10
Hitachi Universal Storage Platform V/VM Universal Volume Manager User's Guide
Set External Volume Parameter Dialog Box
Performing Universal Volume Manager Operations
Advertisement
Table of Contents
