Grounding; Figure 3-8 Wall-Mounting Installation: Attaching The Wall-Mounting Of Cabinet-1 - Panasonic DBS 576 Technical Manual

Chapter 3. Cabinet Installation
2. Temporarily fasten the 4 wall-mounting screws (#10 flat head recommended) to
3. Lift up the Base cabinet, and hook it onto the 4 screws that are temporarily
4. Completely tighten the temporarily fastened screws.
Figure 3-8. Wall-mounting Installation: Attaching the Wall-mounting of cabinet-1

Grounding

Guidelines
• The service ground cable must be 14 AWG minimum. It is recommend that the
• Resistance to ground must be 10
3-8
the wall.
fastening the wall-mounting angle.bracket.
CAUTION:
• Turn the power switch OFF, and make certain the AC cable is not plug
in before grounding the cabinet.
• Be sure to attach an EMI filter to the AC cable to reduce EMI
interference.
• For safety reasons, the DBS 576 must remain grounded at all times.
This ground may be either via the power supply ground or the attached
ground lead.
ground cable at least 12 AWG (stranded).
DBS 576 (USA), issued 6/2/98
or less.
Ohms
Section 300-Installation
576-13-300