Cabinet Installation; Figure 3-5 Securing The Cabinet To The Floor (Base Cabinet Shown); Floor Mounting Installation - Panasonic DBS 576 Technical Manual

Chapter 3. Cabinet Installation

Cabinet Installation

Guidelines
• If you are installing two or more cabinets, refer to Chapter 4, "Installing

Floor Mounting Installation

1. Drill 4 holes in the floor for bolt anchors.
Note:
Figure 3-1, before drilling the holes.
2. Bolt the cabinet to the anchors in the floor through the bolt holes in the bottom
Figure 3-5. Securing the cabinet to the floor (base cabinet shown)
3-6
CAUTION:
• Turn the power switch OFF, and make certain the AC cable is
disconnected before installing the cabinet.
• Handle the cabinet carefully to avoid damage.
• Do not attempt to move the cabinet without assistance.
• The cabinet is heavy and should be secured to a wall so that it does not
topple in the event of earthquake, etc.
• Remove all cabinet covers before installation (see page 3-2).
Additional cabinets" (page 4-1).
Check the positions of the 4 bolt holes in the bottom of the cabinet, shown in
frame.
DBS 576 (USA), issued 6/2/98
Section 300-Installation
576-13-300