Nokia IP200 Series Installation Manual page 70

7
Using the Nokia IPSO Boot Manager
where name is the name of the variable to be cleared. Name can be autoboot,
testboot, bootwait, boot-file, boot-flags, or boot-device.
set-defaults
Use the set-defaults command to set variables to their factory-default values.
The command has the following syntax:
set-defaults name
where name is the name of the variable to be set to its factory default. If name
is not specified, all variables are set to their factory defaults.
For example, the following command sets the value of autoboot to YES, the
factory default:
BOOTMGR[2]> set-defaults autoboot
setalias
Use the setalias command to set an alias. The command has the following
syntax:
setalias name device
where name is the alias name, and device the device for which name is the
alias.
You can have a maximum of eight aliases set at one time.
unsetalias
Use the unsetalias command to clear an alias. The command has the following
syntax:
unsetalias name
where name is the name of the alias to be cleared.
For example, the following command deletes the flash alias from the list of
aliases:
BOOTMGR[2]> unsetalias flash
70 Nokia IP200 Series Security Platform Installation Guide