Canon imagePROGRAF iPF6300S User Manual page 933

Setting Item
Paper Details (The type of pa-
per is displayed
here.)
( *1
→P.916
Paper Details
Keep Paper Type
iPF6300S
CutDustRe- If you choose On, a line will be printed at the cut position
duct. when paper cutting is selected. This option reduces the
amount of debris given off after cutting. It also helps prevent
)
adhesive from sticking to the cutter and keeps the cutter sharp
if you use adhesive paper. (See "Reducing Dust from Cut-
ting Rolls.")
Vac- Specify the level of suction that holds paper against the Plat-
uumStrngth en. (See "Adjusting the Vacuum Strength (Vac-
uumStrngth).")
Scan Wait Select Entire area to apply the ink drying time after each
Time scan until the document is fully printed.
If you select Leading edge, the drying time is entered per
each scan until about 110–140 mm (4.3–5.5 in) from the lead-
ing edge of the paper, and colors may be uneven in the boun-
dary between the areas with and without a drying time. (The
applicable length varies depending on the Print Quality set-
ting.)
Roll Drying- Specify the time to wait for the ink to dry for each sheet.
Time
NearEnd Specify the minimum margin at the leading edge of roll paper
RollMrgn to ensure better printing quality at the leading edge.
Note that if you choose 3mm, it may lower the printing quali-
ty at the leading edge and affect feeding accuracy. The prin-
ted surface may be scratched, and ink may adhere to the lead-
ing edge. It may also cause the Platen to become soiled.
NearEnd Sht Specify a margin at the leading edge of sheets to ensure better
Mrgn printing quality at the leading edge.
Note that if you choose 3mm, it may lower the printing quali-
ty at the leading edge and affect feeding accuracy. The prin-
ted surface may be scratched, and ink may adhere to the lead-
ing edge.
Bordless Mar- Adjust the margin during borderless printing.
gin Choose Automatic to have the printer automatically detect
the paper width and configure the margin settings for border-
less printing. If margins are mistakenly created when Auto-
matic is selected, choose Fixed. In this case, the paper width
is not detected automatically, and the document is printed
without borders, using the margin settings required by the
printer.
Manual Feed Select the Paper Feed Slot to use when printing on sheets.
Normally, select Top. When printing on heavyweight paper
such as POP Board, select Front.
Return De- Choose OK to restore Paper Details to the default values.
faults
Print the paper settings as specified in Paper Details.
Select On when printing on a particular type of paper regular-
ly. (See "Changing the Type of Paper.")
Control Panel
Description, Instructions
→P.804
→P.842
→P.787
> Printer Menu >
9
915
Menu Settings