Administration Tools Page; Chapter 4 Creating Web - Canon VB101 User Manual

Detail Settings

Administration Tools Page

Miscellaneous
"Restoration of Settings"
All but the Basic Settings, System settings and Network
settings will back to the factory shipment settings. After
this process, it will be rebooted automatically.
"Reboot"
Reboots the VB101.
c
We recommend that you make a note of current server settings before you
restore the default settings in "Restore Settings" ( P.106).
Note
Click the [Cancel] button to exit from this page. This returns you to the
settings title page.
56
On-board File System Information
The On-board File System displays the used
space, free space and total space (used
space + free space) in bytes.
Slot A/B
If a PCMCIA card, used for communications
and storage, is inserted into the slot, the
manufacturer and the "About products"
information is displayed. Depending on the
card type and its status, the operation
buttons are displayed and the card status
can be controlled. The card slots are
labelled A and B from the bottom upwards.
Recorded Picture Manipulation and
Information
This section displays the number of
recorded pictures and the status of recorded
picture processing. The maximum number of
pictures that can be recorded is 1000. Under
certain circumstances, the "Rebuilding of
recorded picture list" and "Deletion of
recorded pictures" buttons may be
displayed, and if the images cannot be
recorded the reason will be displayed.
"Rebuilding of recorded picture list"
Normally. there is no need to reconstruct
the picture list. Click this button if you have
removed a memory card and modified the
content of that memory card (erased files,
etc.) on another PC.
"Deletion of recorded pictures"
Deletes pictures stored on a card. Select
one of the settings below and then click
the "Delete" button.
"Time"
Select the period of time following the
shooting of the pictures after which the
pictures are deleted.
"Event"
Select whether the images to be
deleted are those where shooting was
controlled from an external device or
according to a schedule. You can also
select a combination of the two.
"Camera"
Select camera by which the pictures
were shot.
4
Chapter
Creating Web Pages
This chapter describes how to use the VB101 to webcast
information.
Picture data can be transmitted in various ways, including
displaying video or still images and displaying multiple images on
a web page.