Installing In Vehicles; Mount To Windshield; Adjust Device Position - HP f200 User Manual

2.2 Installing in Vehicles

2.2.1

Mount to Windshield

1. Attach the device to the
bracket base. Turn and
tighten the car holder and
the bracket base to make
sure the device is securely
locked in place.
2. With the suction-cup laying flat,
position the suction-cup on the
windshield.
3. Hold the base firmly on the
windshield and press down
the clamp to mount the car
holder to the windshield. Make
sure the base is securely
locked in place.
2.2.2

Adjust Device Position

Rotate the knob to swivel
the device vertically.
Knob
Rotate the knob to swivel the
device horizontally up to 360°.
8
Knob