Battery warning Never dismantle, crush, or pierce the battery, or allow the battery to short-circuit. Do not expose battery being placed in high temperature environment, if battery leaks or bulges, stop continue to use. Always charge using the system. Risk of explosion if battery is replaced by an incorrect type.
Introduction 1.1 Package Contents The package contains the following items. In case there is any missing or damaged item, contact your dealer immediately. Car Recorder Quick start guide CD-ROM Bracket Car adapter...
1.2 Product Overview Item Item Bracket Socket Enter Button ( Power Switch GPS Antenna Memory Card Slot Speaker USB / Power Connector Wide Angle Lens Back Button ( Microphone Up Button ( LED Indicator Down Button ( LCD Panel...
Getting Started 2.1 Inserting the Memory Card Insert memory card with the gold section facing upward and the screen of the camcorder facing upward too, as illustrated. Push the memory card in until a click sound is heard, indicating the card is in position.
2.2 Installing in Vehicles 2.2.1 Mount to Windshield Attach the bracket to the camcorder. Slide it into the bracket holder until you hear a click. Before installing the bracket, please use alcohol to clean the windshield and suction cup of the bracket. Wait for dry and press suction-cup on the windshield.
2.3 Connecting to Power Use only the attached power connector for activating the camcorder and charging the built-in battery. Connect one end of power connector to USB/Power connector port on the camcorder. USB port input: DC 5V / 1A. Plug the other end of the car adapter to the cigarette lighter socket of your vehicle.
2.4 Powering the Camcorder On / Off 2.4.1 Auto Power On/Off Once the vehicle engine is started, the camcorder automatically turns on. If the Automatic Record function is enabled, the recording will automatically start right after the camcorder turns on. 2.5 Initial Settings Before using the camcorder, we recommend you to set up the correct Date and Time and Automatic Record.
Page 9
* Be sure to adjust for daylight saving time (DST) by adding +1 hour to the UTC offset. ** These areas may observe half hour increments and daylight saving time (DST).
Using the Car Camcorder 3.1 Recording Videos 3.1.1 Record videos while driving When the vehicle engine starts up and the Automatic Record function is enabled, the camcorder automatically turns on and starts recording. Recording stops and shut down after the engine is switched off. Note: On some cars, the recording will continue when the engine is switched off.
3.1.3 Driving Safety Menu Item Description Once your car’s location is determined by GPS and the LDWS function is enabled, this product LDWS produces voice and screen message alerts when you drive off of or change lanes at speeds over 50 km/h (31 mile/h).
Menu Item Description in any others countries. Please consult with the shop you purchased if the function is void. The product never guarantee the speed cam datum will be included for the worldwide countries. 3.2 Playback Videos and Photos If recording is in progress, press the button to stop recording.
3.2.1 Deleting Files If recording is in progress, press the button to stop recording. Press the button to enter the OSD menu. Press the button, select “File Deletion”, and press the button. Press the button, select file type and press the button.