Product Logout And Exit - Fujitsu FX-3001SR User Manual

2.11. Product Logout and Exit

Overview
2
After configuring this product or operating a target device, use the logout command
to log out.
Refer to
When connecting from a remote terminal with telnet/ssh, logging out automatically
terminates the session.
When connecting from a local console, the following login prompt is displayed again
upon logging out.
$ logout
6:51PM on Wednesday, 17 May 2006
login:
To exit the product, turn off the power switch except when the product is writing to
the ROM or when a recovery is in progress.
Alternatively, execute the shutdown command and check to verify whether the
following is displayed, then turn off the power switch.
Refer to
$ shutdown
administrator password:
Shutdown NOW!
$ Wed May 17 18:40:52 GMT 2006
syncing disks... done
The operating system has halted.
Please press any key to reboot.
Turning off the power while a setup command is running in the shell console may
result in unsaved settings. Confirm that the command has been executed and
control has been restored to the shell console before turning off the power switch.
SERVIS IP-Serial
26
1p Converter
User's Guide
4.1.3 logout Command (page 55)
Enter↵
4.1.1 shutdown Command (page 53)
Enter↵
Enter↵