HP 2310t User Manual page 33

Table 4-3 OSD Menu (continued)
Icon
ENWW
Main Menu Submenu
Sleep Timer
Language
Information
Current Settings
Recommended
Settings
Serial Number
FW Version
Backlight Hours
Service Support
Factory Reset
Source Control
DVI
HDMI (2310t models
only)
VGA (2310ti models
only)
Default Source
Description
Provides the timer adjustment menu options:
●
Set Current Time—sets the current time in
hours and minutes
●
Set Sleep Time—sets the time you want to
place the monitor in sleep mode
●
Set on Time—sets the time you want the
monitor to wake up from sleep mode
●
Timer—sets the Sleep Timer feature On or Off.
The default setting is Off.
●
Sleep Now—immediately sets the monitor to
enter sleep mode
Selects the language in which the OSD menu is
displayed. The factory default is English.
Selects and displays important information about the
monitor.
Provides the current input video mode.
Provides the recommended resolution mode and
refresh rate for the monitor.
Reports the serial number of the monitor. The serial
number is needed if contacting HP technical support.
Reports the firmware version of the monitor.
Reports the total hours of backlight operation.
http://www.hp.com/support
Returns all OSD menu settings and DDC/CI controls
to the factory default settings, except the Language.
Selects the video input signal. DVI is the factory
default.
Selects DVI as the video input signal.
Selects HDMI as the video input signal.
Selects VGA as the video input signal.
Selects the default or primary video input signal
when the monitor is connected to two active and
valid video sources. The monitor will automatically
determine the video format. The choices are:
● DVI
●
HDMI (2310t models only)
●
VGA (2310ti models only)
The factory default is DVI.
Adjusting the Monitor Settings 25