Station Speed Dial Storage; System Speed Dial Storage - Toshiba Strata DK8 User Manual

STRATA DK DIGITAL TELEPHONE
To Store a Station Speed Dial
Number:
1. Do Not Lift the handset.
2. Press the Redial button.
3. Press the SD button you wish
to store the telephone number
on.
. . . or . . .
Press the Speed Dial
button and enter the code
(1 0 ~ 4 9) that you want to
store the telephone number
in.
4. Enter the telephone number.
5. Press the Redial button.

STATION SPEED DIAL STORAGE

You can store personal telephone numbers on either Station Speed Dial
buttons or access codes. You can call the telephone number by either
pressing the button or dialing the access code.
SD buttons are assigned in system programming. If your telephone does
not have SD buttons, use access codes, instead.
The button can be used if your telephone does not have the Speed
*
Dial button.
Station Speed Dial number access codes are 1 0 ~ 4 9. Space is
provided in Appendix B to record Speed Dial codes and their numbers.
You can enter up to 20 digits. See "Speed Dial Number Linking" later in
this section for instructions on storing additional digits.
It may be necessary to insert a pause or flash signal in the number. See
"Speed Dial Pause and Flash Storage" later in this section for more
details.
The number will be stored and will be dialed when the SD button is
pressed or the Speed Dial access code is dialed.
Repeat this procedure to replace the stored telephone numbers with new
ones. To clear a Speed Dial entry, repeat the preceding procedure,
skipping Step 4.

SYSTEM SPEED DIAL STORAGE

Only Station 10 (typically the operator's or system administrator's phone)
can store System Speed Dial numbers, although they are available to all
stations for dialing. System Speed Dial buttons can be assigned to
stations in system programming.
FEATURE OPERATION
2-7