Feature Button Led Indications; Volume Controls; Ring Tone Volume (Incoming Handsfree Answerback) - Toshiba Strata DK8 User Manual

STRATA DK DIGITAL TELEPHONE
To Adjust Ring Tone:
1. Ensure that the handset is on-
hook.
2. Press and hold down the Vol
button.
Busy Station Transfer—When an outside call is transferred to your
station (from a designated station or Auto Attendant) when you are busy
on another call, the Line LED will appear at your station as follows:
Flash rate: 10 impulses per second
Color: Green
Other stations with the Line: Steady, red

FEATURE BUTTON LED INDICATIONS

Most of the feature buttons have LEDs, and most of these LEDs light red
when activated. Some of these LEDs will also flash as red when
activated.

VOLUME CONTROLS

Your telephone has two Vol buttons for controlling speaker and handset
volume levels. One of these buttons has a symbol that points up, and the
other has a symbol that points down. To increase any of the volume
levels, press the upward pointing arrow; to decrease any of the levels,
press the downward pointing arrow.
Either button must be held down for at least 1/8 of a second for any
volume change to occur. If either button is continually held down,
the volume will continually change about every 1/2 second until the
level limit is reached or the button is released.

RING TONE VOLUME (INCOMING HANDSFREE ANSWERBACK)

Adjust the ring tone volume with the procedure in the left-hand column,
which also changes the volume level of incoming Handsfree Answerback
calls before they are answered by pressing the Intercom button.
You can adjust the ring tone only if the handset is on-hook and the
telephone is in the idle state.
You will hear ring tone as long as you press the button. Press the down
arrow volume button to decrease the volume, or press the up arrow
button to increase the volume.
GENERAL INFORMATION
IMPORTANT!
1-7