Automatic Configuration Of A Musiccast Network - Yamaha MCX-2000 Owner's Manual

MCX2000.book Page 31 Monday, September 12, 2005 11:09 AM
Automatic Configuration of a MusicCAST Network
Your MusicCAST network is created when you register clients to the MCX-2000. Once this process
is complete, the MCX-2000 and clients can quickly resume network connections even after you
reconnect their power cable or awake the MCX-2000 from standby mode (page 14).
n
This section describes the procedure of Client Registration that's also available as a final step of Easy Setup (page 27). Though we explain here the
procedure starting from the menu item selection, the registration process is identical. So, read this section as supplemental information when using
Easy Setup.
Configuration examples:
MusicCAST-only network (without Internet access)
MCX-A10
MusicCAST network integrated into a PC network (with Internet access)
MCX-A10
n
When you configure a MusicCAST network for the first time, you need to manually operate the MCX-2000 and clients. For this reason, regardless
of where each client is finally to be placed, bring the MCX-2000 and all of its clients together in one place to make these processes easier.
Hub
MCX-2000
MCX-A10
MCX-C15
Router/hub
MCX-2000
MCX-A10
MCX-C15
MCX-C15 MCX-C15
xDSL Modem
PC
MCX-C15
MCX-2000 Owner's Manual
MCX-A10
Internet
31