Network Connection (With Clients); Network Configuration - Yamaha MCX-2000 Owner's Manual

MCX2000.book Page 29 Monday, September 12, 2005 11:09 AM

Network Connection (with clients)

Select from MusicCAST Only (no PC or Internet access) or PC Network Integration (to enable PC or Internet access).
Network Configuration
Select from Automatic (with Internet access), Automatic (without Internet access) or Manual. It's recommended to select
one of the Automatic settings (depending on your need) if you're unfamiliar with networking.
n
If you select Manual, Easy Setup finishes with this screen. You need to set up your MCX-2000 and MusicCAST network parameters manually.
See "Manual Configuration of a MusicCAST Network" (page 35) for details.
While you answer these questions, Easy Setup determines network configurations you need. Unless you select to
manually configure network parameters, Easy Setup finally shows a diagram of required physical network connections.
(Your diagram may be different from the following ones.)
Available network configuration options may vary according to your selections.
MCX-2000 Owner's Manual
29