Drain The Fuel - Yamaha YS624T Ower's Manual

I
II
G.700
STORAGE
Long term storage of your machine
will require some preventive proce-
dures to guard against deterioration.
704-001
G-701
DRAIN THE FUEL
Drain the fuel tank, fuel cock, and
carburetor float bowl.
Pour a cup of SAE 10W30 or
20W40
motor oil into the tank, shake the
tank to coat the inner surfaces
thoroughly and drain off the excess
oil.
B-710
ENGINE
1. Remove the spark plug, pour
about one tablespoon of SAE
10W30 or 20W40 motor oil into
the spark plug hole and reinstall
the spark plug. Recoil start the
engine by turning over several
times (with ignition off) to coat
the cylinder walls with oil.
-43-
2. Pull the recoil starter until you
feel compression. Then stop
pulling. (This prevents the
cylinder and valves from rust.
ing.)
B-716
CHASSIS
1. Lubricate all specified points
with grease or oil (SAE 5W30).
2. Loosen the track and block up
the chassis so that the track is
suspended above the ground.
(T-Model)
3. Clean exterior of the machine
and apply a rust inhibitor.
4. Store the machine in a dry, well-
ventilated place, with the cover
placed over it.
5. The machine must remain in a
vertical position when stored,
carried or operated.
-44-
('