I
I
I
II
.11
1. Placethe machine
on a level sur-
face and loosen the skid nut.
2. Raise or lower the skid to adjust
the auger clearance between the
lowest auger edge and a level
surface.
Standard Auger Clearance:
5 mm (0.2 in)
CD Skid
~ Auger clearance
CIDLevel surface
@ Lowest auger edge
NOTE:
·
Use the standard clearance for
smooth
concrete
or asphalt
roads.
·
Increase the clearance for stone
or gravel roads.
3. Tighten the skid nuts.
NOTE:
Be sure the skid bottom is in com-
plete contact with the levelsurface.
-35-
8-588
FOOT PEDAL (Auger
Height)
ADJUSTMENT
4-Stage
Position
1. Shift the shift lever to "Neutral"
position.
2. Hold the handlebars with both
hands while stepping lightly on
the foot pedal.
3. Raise or lower the handlebar to
adjust the foot pedal position.
lu!
Standard Foot Pedal Position:
2nd groove from the top
CD Foot
pedal
~
Top groove
CID
Free position
NOTE:
·
Lower the foot pedal position to
increase the auger height.
·
Shift the foot pedal to a lower
position
when
reversing the
machine.
.
...
Free
Position
1. Raise or lower the handlebar to
adjust the auger height.
8-590
SCRAPER ADJUSTMENT
..
II
·
Be sure
the main switch key
and spark plug lead
are re-
moved or disconnected
be-
fore adjusting.
·
Be sure the auger and im-
peller have stopped
before
adjusting.
-36-