Restoring Backups; Resetting To The Factory Settings; Reboot; Updating The Firmware - Siemens Gigaset SE361 WLAN User Manual

Restoring backups

ì
Activate the Restore configuration option.
ì
In your file system, select the backup file with which you wish to restore the config-
uration.
ì
Confirm the action in the dialog screen that opens by clicking on OK.
ì
Click on OK. The configuration will now be updated.

Resetting to the factory settings

You can reset the Gigaset SE361 WLAN to the factory settings. You should do this before
making the device available to others or exchanging it through your dealer. If you do
not, unauthorised persons will be able to use your Internet access data at your expense.
ì
Select the option Reset configuration to factory default settings and click on OK.
ì
Confirm the action in the dialogue screen that opens by clicking on OK.
.
Note:
You can restart your Gigaset SE361 WLAN if it no longer functions correctly. It should
then be ready for use again (see page 18).
Please bear in mind that when the device is fully reset all configuration settings will
return to the factory settings. This means that you will have to completely reconfigure
the Gigaset SE361 WLAN.

Reboot

You can restart your Gigaset SE361 WLAN if it no longer functions correctly. It should
then be ready for use again.
ì
In the Administration menu, select Reboot.
ì
Click on OK to restart the device.

Updating the firmware

When Siemens or your Internet provider makes a new version of the firmware available,
you can update the firmware for your Gigaset SE361 WLAN. To do this you must first
download the new firmware onto your PC.
Then proceed as follows:
ì
Close down all network activities on your local network.
ì
In the Administration menu, select Firmware Update.
Administration and status information
69