Setting Up The Gigaset Se361 Wlan - Siemens Gigaset SE361 WLAN User Manual

Reset
The reset button is located behind the small opening labelled Reset.
u
Reboot function (software reset): Press the button for longer than 1 second but less
than 5 seconds to reboot the device. This does not affect the configuration settings.
u
Reset function (returns to factory settings): Press and hold the button for at least 5
seconds to return all settings to the factory settings.
Warning: This will clear all the configuration settings you have made since the initial
startup.
Updated firmware will not be affected.

Setting up the Gigaset SE361 WLAN

The Gigaset SE361 WLAN can be set up in any suitable location in your home or office.
You do not need any special wiring. However you should comply with the following
guidelines:
u
Only operate the Gigaset SE361 WLAN indoors within a temperature range of 0°C to
+40°C. Do not position the Gigaset SE361 WLAN near sources of heat. Do not cover
the ventilation slots. High temperatures can damage the device.
u
A mains socket for 230V~ and a connection socket for the modem or LAN must be
available where you set up the Gigaset SE361 WLAN.
u
Do not position the device in the immediate vicinity of stereo equipment, TV sets or
microwave ovens. This may cause interference.
u
Position the Gigaset SE361 WLAN so that it is as near to the centre of your wireless
network as possible. Make sure that the position of the Gigaset SE361 WLAN offers
optimum reception throughout the house or office. You can improve the reception
quality by aligning the antenna (turn and/or tilt).
u
Position the Gigaset SE361 WLAN on a non-slip surface.
u
Do not place the Gigaset SE361 WLAN on any furniture surface that could be
affected by the heat from the device.
u
Position the Gigaset SE361 WLAN so that it cannot fall.
u
Lay the cables so that nobody can trip over them.
u
Note that the screws for mounting the Gigaset SE361 WLAN on the wall are not
included in the scope of delivery.
First Steps
19