During The Wash Cycle; On The Utensils - Siemens Dishwasher Instructions For Use Manual

Table of Contents

Advertisement

Water is left in the appliance
at the end of the programme.
(E24) Waste water hose is
blocked or kinked.
(E25) Waste water pump
blocked, cover on the waste
water pump is not locked in
position (see Maintenance
and Care).
Filters blocked.
The programme has not yet
ended. Wait until programme
ends (digital display indicates
0:00) or implement the "Reset"
function.
Refill indicator for salt
rinse-aid
is not lit.
5
Refill indicator/s switched off.
Adequate salt/rinse-aid available.

... during the wash cycle

Unusual foam formation
Handwash liquid in the rinse
aid dispenser.
Spilled rinse-aid causes excessive
frothing, therefore please remove
with a cloth.
Appliance stops during the wash
cycle.
Power supply interrupted.
Water supply interrupted.
Knocking/rattling noise during
rinsing
Spray arm is striking utensils.
Utensils not arranged correctly.
Filling valves making striking
noises
Caused by the installation of the
water line and has no effect on the
function of the machine. Remedial
action is not possible.

... on the utensils

and/or
4
If phosphate-free detergents are used with
hard tap water, white deposits may be
deposited more easily on utensils and the
container walls.
Contact the detergent manufacturer,
in particular if:
Food residue on the utensils.
Utensils placed too closely
together, utensils basket overfilled.
Too little detergent.
Rinse programme too weak.
Spray arm rotation obstructed.
Spray arm nozzles blocked.
Filters blocked.
Filters incorrectly inserted.
Waste water pump blocked.
Top basket on right and left not set
to same height.
Tea or lipstick residue is not
completely removed.
Detergent has inadequate
bleaching effect.
Too low rinsing temperature.
Too little/unsuitable detergent
White stains on the
utensils/glasses remain milky.
Too little/unsuitable detergent.
Too weak programme selected.
No/too little rinse-aid.
No/too little salt.
Water softening system set to the
wrong value.
Salt dispenser lock not fastened.
the utensils are very wet at the end
of the programme.
limescale forms.
en
21

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents