Silvercrest CRE-521 Instructions Manual page 36

To activate the "EON" function, press the control dial
the control dial until you get to the menu item "EON". There you will have the option of activating (ON) or deactivating (OFF)
the function by turning the dial. If the "EON" function is activated, "EON" will appear on the display.
The setting is saved either when the desired value is confirmed by pressing the control dial
(don't change anything on the device for approx. five seconds). If you confirm the selection by pressing the control dial
will reach the next possible setting. If you use the automatic storage, the device will return to the standard display.
"REC": Settings for the recording function
This menu item gives you the option of selecting between WMA and MP3 coding while recording. The recording function will be
described in detail below under 17.3.
To reach the menu, press the control dial
the control dial until you reach the menu item "REC". There you will have the option of selecting between "WMA" and "MP3"
by turning the dial.
The setting is saved either when the desired value is confirmed by pressing the control dial
(don't change anything on the device for approx. five seconds). If you confirm the selection by pressing the control dial
will reach the next possible setting. If you use the automatic storage, the device will return to the standard display.
"DSP": Sound settings – 4-band equalizer
In the "DSP" menu, you have the option of selecting between four different sound settings. The choices are between the sound
settings "CLASSIC", "ROCK", "POP" and "FLAT". Here you also have the option of deactivating the "DSP" function ("DSP
NONE").
To select between the different sound settings, press the control dial until menu level 2 is reached. The "INVOL" function will
appear. Press the control dial repeatedly until you get to the menu item "DSP". There you will have the option of selecting
between the different sound settings by turning the dial.
The setting is saved either when the desired value is confirmed by pressing the control dial
(don't change anything on the device for approx. five seconds). If you confirm the selection by pressing the control dial
will reach the next possible setting. If you use the automatic storage, the device will return to the standard display.
Note:
After selecting the sound setting, it will appear on the display of the device together with the message "DSP".
36
until menu level 2 is reached. The "INVOL" function will appear. Press
until menu level 2 is reached. The "INVOL" function will appear. Now briefly press
or through automatic storage
you
or through automatic storage
, you
or through automatic storage
, you