Philips Fax Machine Overview page 13

In the UK you can select with function 15 only the connection
to a private branch exchange.
In all other countries it is also possible to select the telephone
line type with this function. Press MENU 15, then OK ,
select with </> and confirm with OK. Continue with point
Select function 15 by pressing MENU and then entering
the digits 15. Press OK.
You can switch on the PABX operation using u. Press OK.
Now enter the key that has to be pressed to obtain an
outside line (this outside line access code must be obtained
from the manufacturer). This is either 0, R (in some
systems also described as FLASH) or a number key. Press
OK.
Press OK. Your machine will then check that the outside
line can be obtained.
... if the check is successful, briefly appears:
... if the check is unsuccessful, briefly appears:
You will be asked to repeat the entry. Check the key for
obtaining an outside line. However, if you have chosen the
correct key and on the display still appears the message
delete the key for obtaining the outside line by pressing
CLEAR.
In case your PABX requires R to obtain an outside line but
it is still not possible to get through to the line, your
system might not be according to the regulations. There-
fore some technical settings have to be changed on your fax
machine. Please refer to your Fax Call Centre.
In order to be able to use your fax machine as a printer and
scanner in conjunction with your computer, you must connect
it to the computer and install the software provided with the fax
machine. This includes comprehensive on-line documentation.
Ÿ For Windows
® 95:
486 processor or higher, at least 16 MB RAM
Ÿ For Windows
® 98:
Pentium ® 133 MHz, at least 32 MB RAM
For Windows ® ME:
®
Pentium 166 MHz or higher, at least 32 MB RAM
®
For Windows NT or Windows 2000:
®
Pentium II or higher, at least 64 MB RAM
Ÿ VGA screen
Ÿ parallel port: IEEE 1284 ECP
Please use only printer cables which are complying to the
norm IEEE 1284 and must not be longer than 2 m. For
installation, you will need about 20 MB free memory on
the hard disk.
Make sure that the fax machine and the computer are both
switched off or unplugged from the power supply.
Remove the socket cover for the printer cable.