Connecting External Components; Connecting The Fm Antennas - Samsung MAX-DA75 User Manual

Connecting External Components

Connecting an External Analog Component
Example: Analog signal components such as a VCR, Camcorder, and TV.
(not supplied)
1
Connect Audio In on the DVD player to Audio Out on the external analog component.
•
Be sure to match connector colors.
2
Press AUX/PORT to select AUX 1.
•
' AUX 1' appears in the display.
AUX2 : Connecting an External Analog Component
Analog signal components such as a VCR.
AUX2 : Rear Panel
Audio Cable
(not supplied)
If the external analog
component has only
one Audio Out, connect
either left or right.
15
Audio Cable
If the external analog component
has only one Audio Out, connect
either left or right.
1
Connect AUX IN 2 (Audio) on the MINI
COMPONENT rear panel to the Audio Out of the
external analog component.
Be sure to match connector colors.
2
Press the AUX/PORT button to select <AUX2> input.
The mode switches as follows : AUX 1 AUX 2.
OPTICAL:Connecting an External Digital Component
Digital signal components such as a Cable Box/Satellite receiver(Set -Top Box).
Extermal Digital Component
1
Connect the Digital Input(OPTICAL) on the Mini Component to the Digital Output of the
external digital component.
2
Press the AUX/PORT button to select DIGITAL IN.

Connecting the FM Antennas

FM Antenna (supplied)
FM antenna connection
1. Connect the FM antenna supplied to the FM 75Ω COAXIAL terminal as a temporary measure.
2. Slowly move the antenna wire around until you find a location where reception is good, then
fasten it to a wall or other rigid surface.
• If reception is poor, connect an outdoor antenna.
Before attaching a 75Ω coaxial cable (with a standard type connector), disconnect the supplied FM
antenna.
• This unit does not receive AM broadcasts.
Note
Optical Cable
(not supplied)
16
ENG