Demo Function / Dimmer Function/Eco Function; Cd Ripping Function - Samsung MAX-DA75 User Manual

DEMO Function / DIMMER Function/
ECO Function
DEMO Function
You can view the various functions available on
your system.
Press DEMO/DIMMER button.
•
The various functions available are listed in turn on the
display.
•
All these functions are described in detail in this booklet.
For instructions on how to use them, refer to the
appropriate sections.
DIMMER Function
You can adjust the brightness of the display on the main
unit so it won't interfere with your movie viewing.
Press DEMO/DIMMER button.
•
Each time the button is press, the brightness changes as
follows: DIMMER ON(Dim)
DIMMER
OFF(Bright).
To cancel this function, press
DEMO/DIMMER again.
ECO Mode Function
You can save the power consumption while the unit is turned
off(on standby).
• To activate the ECO mode,Press POWER while the unit is turned off (on standby),The
display illumination(including the display demonstration) disappears.
• While ECO mode is activated, the display demonstration is canceled temporarily.
55

CD RIPPING Function

You can rip a compact disc as a MP3 file on the USB
This feature enables you to ripping with the start of the disc or track of your choice.
1
2
Switch the system
Connect the
on by pressing
USB.
STANDBY/ON.
4
5
Press CD
To stop ripping, press
RIPPING button
STOP
on remote control
then automatically
to starting ripping.
create and save as
the MP3 file.
If the system is either at pause or playing state,turn
the CD RIPPING dial down or press CD RIPPING
button on the remote control to start the ripping for After CD-Ripping,a directory named
the current track.
"RIPPING" will be created in your device.The
Turn CD RIPPING dial up or press and hold CD
file name follows the format:"SAM-
RIPPING button on the remote control to start
XXXX".MP3.
ripping the all tracks of Disc.
"CD Ripping" is displayed in red and CD RIPPING
starts.
During CD ripping, do not disconnect USB device.
Note
Don't disconnected USB and AC Cord during CD-Ripping.This may cause the file
damage.If you want to stop CD-Ripping during CD-Ripping,you must press stop Key
first and after the CD Stopped,then you can remove the USB device.
If you disconnected USB device when CD Ripping,the main unit will be power off and
you may not delete the ripped file,In this case, please connect the USB on the PC and
backup the USB data on the PC first and then formate the USB device .
On the CD playing ,connect the USB,the CD play will be paused and will resume
playing till the USB initilization finished.
According the different USB the initilization time maybe different.
When the USB memory is not enough,it will be displayed "NOT ENOUGH MEMORY"
DTS-CD can't for CD Ripping.
Starting CD ripping within 5 seconds can't create the CD Ripping file.
Ripping file is only created when CD Ripping is stopped afters 5 seconds
(ex. SAM-0001.MP3).
With external HDD,FAT format the USB can be CD Ripping,but not NTFS.The CD
Ripping function of this product does not support all USB devices.
When you use CD high speed search function,the CD Ripping can't work.
When CD Ripping, CD audio can't be out.
During CD Ripping,do not deal impact.If is shocked while CD Ripping,CD Ripping
maybe disengage.
Sometimes, some of USB devices, CD Ripping time is long.
If you use scratched disc for CD Ripping, or connect/disconnect HDMI cable
during CD Ripping, there might be some noise and broken sound on ripped
file.
When HDMI audio on, the CD RIPPING can't work.
3
Load a compact
disc(Digital
Audio).
Press the OPEN/CLOSE button to open
the disc tray.
Insert a CD and press the OPEN/CLOSE
button to close the disc tray.
Use the CD selection ( ) buttons to
button.and
select the desired song.
CD Ripping Feature Supported Player
Product Company Type
YP-T8 Samsung MP3 Player
YP-T7F Samsung MP3 Player
YP-D1 Samsung MP3 Player
YP-T8N Samsung MP3 Player
YP-U2 Samsung MP3 Player
YP-T9 Samsung MP3 Player
YP-K5 Samsung MP3 Player
YP-K3 Samsung MP3 Player
YV-150 Samsung MP3 Player
YP-U3 Samsung MP3 Player
56
ENG