Table of Contents
Advertisement
12.1.2 Lower glass
1
Disconnect the mains lead.
2
Lift the top cover release lever (1) and open the top
cover (2).
Important:
L Close the manual input tray (3) before
opening the top cover.
1
4
Caution:
The fuser unit (4) gets hot. Do not touch
it.
Note:
L Do not touch the transfer roller (5).
3
Remove the drum and toner unit (1) by holding the
tabs.
2
1
4
Clean the lower glass (1) with a soft and dry cloth.
5
5
Reinstall the drum and toner unit (1) by holding the
tabs.
3
L Make sure that the triangles (2) match to install
the drum and toner unit correctly.
12. Cleaning
1
1
2
87
Advertisement
Table of Contents
