KH2267_68_Mikroanlage_EN.qxd
KH 2267 / 2268
➩
If you wish to activate/deactivate the alarm function,
briefly press the TIMER
After each switching on the alarm settings are shown on the
display.
19. Activating the sleep function (Sleep)
You can detemine a time after which the micro-system will
switch off. You can select a switch-off time between 10 and
90 minutes.
➩
Switch on the micro-system.
➩
Press the SLEEP FUNCTION button
the switch-off time.
The switch-off time is indicated on the display. Each time the
button is pressed the switch-off time is reduced by ten
minutes.
20. Radio operation / Selecting a band (USW/MW)
You can receive USW and MW stations with the micro-system.
➩
To select the radio station press the BAND SELECTION
i
2!
BUTTON
resp.
.
➩
In order to change over between the radio stations, press
the BAND SELECTION BUTTON
➩
If the USW reception is impaired, switch over to MONO by
means of the STEREO/MONO CHANGEOVER
21. Operating the radio
Automatic search function
➩
Switch on the tuner of the micro-system.
➩
g
Press button
resp.
keep it pressed for a moment.
The search function begins and stops automatically when a
frequency with sufficient reception has been found.
➩
To re-start the search function press the button
2%
h
resp.
or
resp.
moment.
➩
To stop the search function press the button
2%
h
3!
or
resp.
again.
Manual search
With the manual search function you can carry out a fine
adjustment function of the stations e. g. if reception is difficult.
➩
Switch on the tuner of the micro-system.
➩
To increase the reception frequency briefly press the
g
2%
button
resp.
➩
To reduce the reception frequency briefly press the button
h
3!
resp.
.
Storing the stations (memory)
You can store stations in up to 40 program locations
(30 x USW and 10 x MW).
➩
Set the desired station.
31.03.2006
13:31 Uhr
Seite 8
u
3$
resp.
button.
3%
, until you have set
i
2!
resp.
again.
2*
function.
2%
h
3!
or
resp.
again and
3!
again and keep it pressed for a
g
.
➩
To store the station, press the PROGRAMMING BUTTON
3@
or
.
The display for the program location flashes.
➩
Select the desired program location with PROGRAM
SELECTION BUTTON +
3)
BUTTON -
.
➩
To confirm the program location, press the PROGRAMMING
y
3@
BUTTON
or
The station is now stored in the selected program location.
Selecting stored stations
You can select the stored stations during radio operation.
➩
Press PROGRAM SELECTION BUTTON +
SELECTION BUTTON –
➩
Press until the program location appears on the display.
22. CD functions
Inserting a CD
➩
To open the CD compartment, press the button OPEN/CLOSE
CD-COMPARTMENT
The flap of the CD compartment folds upwards.
➩
Insert the CD into the CD compartment with the printed
side facing up.
➩
Press the CD down slightly until it is firmly positioned.
➩
To close the CD compartment, press hte button OPEN/CLOSE
CD-COMPARTMENT
➩
Select the button FUNCTION SELECTION
CD function.
The data (number of titles and total playing time) are shown
on the CD display.
Removing the CD
➩
To open the CD compartment, press the button OPEN/CLOSE
CD-COMPARTMENT
➩
Remove the CD.
g
Starting the play function
➩
Press button
resp.
Stopping the play function
➩
f
Press button
Interrupting/continuing the play function
➩
While playing, press button
➩
To coninue the play function press button
2$
resp.
again.
Next/previous title
➩
To move on to the next title on the CD, press button
g
2%
resp.
.
➩
To play the previous title of a CD,
breifly press button
- 8 -
2&
or PROGRAM SELECTION
.
2&
or PROGRAM
3)
.
a
.
a
again.
o
resp.
a
on the micro-system.
d
2$
resp.
.
2^
resp.
.
d
2$
resp.
.
h
3!
resp.
twice.
y
2@
the
d