Automatic Trunk-To-Trunk Transfer - NEC Xen IPK Features & Specifications Manual

Automatic Trunk-to-Trunk
Transfer
FEATURE
DESCRIPTION
SYSTEM
AVAILABILITY
OPERATING
PROCEDURES
Features and Specifications Manual
This feature allows an incoming CO/PBX call to connect to another CO/PBX
trunk and dial a predetermined telephone number. This is especially useful
for forwarding calls to an answering service during non business hours (i.e.,
nights, weekends, holidays).
Terminal Type:
Attendant Position terminals assigned for this ability.
Required Components:
None.
To set the Trunk Forward Assignment from the Attendant Position:
T
1. Press .
2. Dial .
FC
3. Dial the incoming trunk number (
4. Press .
L
5. Dial outgoing telephone number where the call is to be directed.
T
6. Press .
To cancel the Trunk Forward Assignment from the Attendant
Position:
T
1. Press .
2. Dial .
FC
3. Dial the incoming trunk number
4. Press .
L
T
5. Press .
Note: Dialling 00 sets or cancels the Automated Attendant mode for all
trunks when the trunks are idle. If a trunk is busy when 00 is dialled, it
is not set. To set the Automated Attendant to a busy trunk, dial the
individual trunk number.
A-27
0A~FD),
(0A~FD
, 00 )
A27 – 109