Table of Contents
Advertisement
Quality Setting
Item
Compression
Rate
WB
R-B
Mg-G
Color Level
Enhance
Pedestal
Function & Setting
Sets the image compression rate. A lower compression rate
means a higher image quality. However, with a reduced
compression rate, data volume also increases.
Setting Values : 1 to 7
Determines the setting of the white balance adjustment.
The white balance can be adjusted for lighting conditions
with color temperatures from 2500K to 8000K.
ATW : Auto-Tracking White balance mode, adjusts the
white balance automatically according to the
temperature of the lighting conditions.
During ATW setting, "R-B GAIN" and "M-G GAIN"
are not displayed and the hue setting is disabled.
AWC : If AWC is selected in the pull down menu, Auto
White Control mode is activated and the white bal-
ance will be adjusted.
Adjusts the phases of R (Red) and B (Blue) under AWC
mode.
To enhance blue
To enhance red
Setting values
Adjusts the phases of M (Magenta) and G (Green) under
AWC mode.
To enhance green
To enhance magenta
Setting values
Sets the color level of the picture signal.
To increase
To decrease
Setting values
Sets the contour enhancement which controls the sharp-
ness of the monitor picture.
To soften the picture
To sharpen the picture : Set a larger value.
Setting values
Sets the pedestal level (black level) of the video signal.
To darken the picture
To brighten the picture : Set a larger value.
Setting values
: Decrease the value.
: Increase the value.
: 0 to 100
: Decrease the value.
: Increase the value.
: 0 to 100
: Set a smaller value.
: Set a larger value.
: –5 to 5.
: Set a smaller value.
: –5 to 5.
: Set a smaller value.
: -5 to 5.
Initial Value
2
ATW
color
56
30
0
0
0
55
Advertisement
Table of Contents
