Table of Contents
Advertisement
2.
Confirm the settings.
For other settings, ☞ next page
3.
Click
4.
Start up [V.Networks Controller]. (
Note
In a system where more than one VN-C655 are used, turn on the power for a VN-C655 first
and proceed the setting to 2-4 Other Settings with V.Networks Setup Tool. Only then turn on
the power for a second one and go on to 2-4. Repeat the procedure for the other cameras.
.
☞
Page 45)
Select whether to use DHCP.
Note
● With DHCP selected, the IP ad-
dress of the DHCP server etc. can
be checked.
Change the IP address to the one alloted,
or approved, by the network administrator.
Set the subnet mask to an appropriate
value according to the operating environ-
ment. Ask the network administrator if nec-
essary.
Click
.
[V.Networks ID] works as an identifica-
tion code set to VN-C655. Only alphanu-
meric characters can be used. This ID
does not directly affect the operation by
the user. Normally, the ID should be set
as "CAM00001," "CAM00002" etc.
(0 to 8 characters)
Click
Note
A new IP address becomes effective
when VN-C655 is automatically reset.
to update the values.
29
Advertisement
Table of Contents
