Wi-Fi Protected Setup Wizard - D-Link AC750 User Manual

Wi-Fi Protected Setup Wizard

Wireless Settings: Wi-Fi Protected Setup Wizard
If your Wireless Clients support the W-Fi Protected Setup (WPS) con-
nection method, this WPS Wizard can be used to initiate a secure wire-
less connection between this device and wireless clients with a simple
click of the WPS button. The Wi-Fi Protected Setup Wizard is specially
designed to assist basic network users with a simple, step-by-step set of
instructions to connect wireless clients to this router securely using the
WPS method.
To initiate the Wi-Fi Protected Setup Wizard click on the Add Wireless
Device with WPS button.
Step 1: In this step there are two options to choose from. You can
choose Auto if the wireless client supports WPS, or Manual if the wire-
less client does not support WPS.
At any stage during this wizard, you can click on the Prev button to
return to the previous page, click on the Next button to continue to the
next page, or click on the Cancel button to discard the changes made
and return to the main wireless page.
Step 2 - Auto: After selecting Auto, the following page will appear.
There are two ways to add a wireless device which supports WPS. Firstly,
the Personal Identification Number (PIN) method will prompt you to
enter the PIN code which was provided with your wireless device. This
PIN code should be identical on the wireless client. Secondly, the Push
Button Configuration (PBC) method will allow the wireless client to con-
nect to your router by pressing the WPS button on the client device.
Choose the preferred method of WPS and click on the Connect button
to establish a connection.
D-Link DIR-810L User Manual 41