D-Link AC750 User Manual page 33

Internet Connection Type
In this section, the user can select from a list of Internet connection types that can be configured and used on this router. Options to choose from
are Static IP, Dynamic IP, PPPoE, PPTP, L2TP, and DS-Lite.
After selecting a specific Internet connection type, this page will automatically refresh and provide unique fields to configure related to the
specified Internet connection type.
My Internet Connection is: Dynamic IP (DHCP)
The default WAN configuration for this router is Dynamic IP (DHCP). This
option allows the router to obtain an IP address automatically from the
device that is connected to the Internet port.
Note: If you're not sure about the type of Internet Connection you have,
please contact your Internet Service Provider (ISP) for assistance.
After selecting Dynamic IP, the following parameters will be available for
configuration:
Advanced DNS Service: Check the box to enable Advanced DNS
Host Name: The Host Name is optional, but may be
Use Unicasting: Tick this option if your ISP uses the unicast
Primary DNS: Enter the Primary DNS IP address used
Secondary DNS: Enter the Secondary DNS IP address used
MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your specific ISP. The
MAC Address: The default MAC Address is set to the Internet port's physical interface MAC address on the Broadband Router. It
D-Link DIR-810L User Manual
Service
required by some ISPs. Leave blank if you
are not sure.
method to provide IP addresses.
here.
here. This field is normally optional. Only
one DNS address is required for a func-
tional Internet connection, but using a
second DNS address provides more stabil-
ity.
default MTU is 1500
is not recommended that you change the default MAC address unless required by your ISP. You can use the Copy
Your PC's MAC Address button to replace the Internet port's MAC address with the MAC address of your Ethernet
card.
29