Hitachi SelecSet 900 Series User Manual page 36

Canceling
feature key
programming
Feature access
code list
HCXTD850, Rev. A02, September 2001
To cancel feature key programming:
1
Lift your handset or press <SPKR>.
2
Dial the station speed calling
cancellation code.
3
Press the appropriate autodial key.
4
Wait for confirmation tone (three short beeps).
For a list of feature access codes used in your system,
contact your system administrator. Then, fill in the feature
access codes next to the appropriate features in the Feature
Access Code Summary located in the reference section in
the back of this guide.
P
ROGRAMMING
F K
EATURE EYS
1-25