Group Intercom (Gicom) - Hitachi SelecSet 900 Series User Manual

Group Intercom (GICOM)

About group
intercom
Using group
intercom
HCXTD850, Rev. A02, September 2001
You can use the group intercom feature, with a <GICOM>
autodial key, to initiate an intercom call to another key
group member's SelecSet.
A group intercom call causes the same special priority
ringing as the <ICOM> key. GICOM, however, limits the
number of people who can cause priority ringing at your
phone. Only the members of your key group can use
GICOM to call you.
GICOM calls do not cover, forward, or hunt, and cannot
be picked up using any type of call pickup.
To use group intercom, follow these steps:
1
Lift your handset.
2
Press the <GICOM> key or...
3
Enter the group intercom
feature access code.
4
Dial the extension number or press the autodial key
that is programmed to call the key group member.
5
The key group member's phone rings at CAP 4 with
priority ringing. When he or she answers, you can
begin speaking.
If an autodial key is not programmed for GICOM,
you may want to assign one. See
Feature Keys"
G
ROUP
on page 1-24.
I (GICOM)
NTERCOM
"Programming
3-13