Audio Board - NEC VERSA LXi Service And Reference Manual

A – Screws
Partially lift the top cover. Disconnect the control panel cable from connector P52 on the
13.
main board.
Disconnect the cable from connector P2 on the audio board.
14.
Remove the top cover and LCD panel as a unit.
15.

Audio Board

Use the following steps to remove the audio board from the system.
Remove the keyboard, front cover, top cover, and LCD panel from the system.
1.
Locate and remove the two screws securing the audio board to the system.
2.
A – Screw
Lift the tape (if any) that secures the narrow arm of the board.
3.
Lift the audio board up and away from the main board to disconnect it from connector P54.
4.
Remove the audio board.
Locating the 15' LCD Panel screws
Removing the audio board screws
B – Audio Board
Disassembly and Reassembly 3-21