General Rules; Battery - NEC VERSA LXi Service And Reference Manual

General Rules

When disassembling the system unit, follow these general rules.
Turn off the system and disconnect all power and all options, including the AC adapter (if
!
connected) and battery packs (see the procedures that follow).
Do not disassemble the system into parts that are smaller than those specified in the
!
procedure.
Label all removed connectors. Note where the connector goes and in what position it was
!
installed.
from yourself and your clothing by touching a nearby metal surface.

Battery

Remove the battery pack installed in the NEC Versa LXi system as follows.
Note
Use the batteries in the NEC Versa computer for which they are designed. Installing
another manufacturer's battery, or using a combination of very old and new batteries can
deteriorate battery and equipment performance.
Power off the system. Close the LCD and turn the system over.
1.
Slide the battery release latch toward the back of the system and hold firmly.
2.
3-4 Disassembly and Reassembly
Before handling any internal components, discharge static electricity
Locating the battery bay release latch
A – Battery Release Latch