Canon MP980 series On-Screen Manual page 563

Mc-3204-v1.00
Hide thumbs Also See for MP980 series:
Table of Contents

Advertisement

Scanner Button Settings Tab (Save)
- Text documents smaller than 2L (5 inches x 7 inches) (127 mm x 178 mm), such as
paperback pages with the spine cut off
- Documents printed on thin white paper
- Wide documents such as panoramic photos
Reflective CD/DVD labels may not be scanned properly.
Place documents correctly according to the type of document to be scanned. Otherwise,
documents may not be scanned correctly.
See "
Placing Documents
Actions
Scan Settings
Document Size
Select the size of the document to be scanned.
When you select Custom, a screen in which you can specify the document size appears. Select a
Units, then enter the Width and Height and click OK.
Important
When you select Auto Detect, the image may not be scanned at the correct position and size. In
that case, change the size to the actual document size (A4, Letter, etc.) and align a corner of the
document with the corner at the arrow of the Platen.
See "
Placing Documents
This setting is not available when Select Event is Save to PC with Document Type set to Auto
Mode.
Note
Document Size will not be displayed if Film is selected for Document Type in Event. Document
Type will be displayed.
Document Type
Select the type of film to be scanned. When Film(Auto mode) is selected, the film type (negative or
positive) is automatically detected.
Note
To scan Black and White Positive Film, select Positive Film for Document Type and press Black
Start button.
Resolution
Select the resolution at which to scan documents. The following scanning resolutions can be
specified:
When Document Type is other than film: 75 dpi/100 dpi/150 dpi/200 dpi/300 dpi/400 dpi/600 dpi
When Document Type is film: 300 dpi/400 dpi/600 dpi/1200 dpi/2400 dpi/4800 dpi
Resolution
Important
This setting is not available when Select Event is Save to PC with Document Type set to Auto
Mode.
Specify...
For Document Type, Document Size and Scanning Resolution, the settings specified in the Scanner
Button Settings tab are displayed.
For Descreen, Unsharp Mask, etc., see the corresponding descriptions in "
Box
."
Important
" for details on how to place documents.
" for details on how to place documents.
Page 563 of 947 pages
Scan Settings Dialog

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents