Canon MP980 series On-Screen Manual page 535

Scan Settings Dialog Box
>
Advanced Guide Scanning
Settings Dialog Box
Scan Settings Dialog Box
The Scan Settings dialog box opens when you click Specify... in the dialog box that opens when scanning
from the One-click Mode screen or the Custom Scan with One-click tab.
In the Scan Settings dialog box, you can make advanced scan settings.
For Photos/Documents (Platen)
For Film
Important
The displayed items vary by document type and how the screen was opened.
The setting items vary in the Scan Settings dialog box that opens after clicking Specify... in the Film
dialog box.
Note
The Scan Settings dialog box can also be opened by clicking Specify... on the Scanner Button
Settings tab of the Preferences dialog box.
Document Type
Select the type of document to be scanned. When Auto Mode is selected, the document type is
automatically detected.
In that case, Color Mode, Document Size, etc. are automatically set as well. When Film(Auto mode) is
selected, the film type (negative or positive) is automatically detected.
Important
Film may not be scanned correctly when Auto Mode is selected. In that case, select the type of
film and scan again.
When opened from the Scanner Button Settings tab, the Document Type specified in the Scanner
> Scanning with the Bundled Application Software > MP Navigator EX Screens
> Scan
Page 535 of 947 pages