Setting The Line Type - NEC IT3510 Operation Manual

NEC IT Series
2.6
NEC IT3510/IT2510 Operations Manual

Setting the Line Type

There are two methods of dialing on telephone lines: Touch-tone dialing (PB)
and Dial-Pulse (DP10, DP20) dialing. Dialing a facsimile telephone number is
impossible if the correct method of dialing does not match the type of
telephone line installed at your machine. This setting will register the type of
dialing method used by the NEC IT3510/IT2510.
Before Starting Operations:
PB (Push Button, or Touch-tone style) dialing is the factory default setting.
Setting the Line Type
1.
Touch [Initial Setting] on the
Administrator Management
screen.
Refer to Section 2.2 Accessing
the Administrator Management
Screen on page 3-12.
2.
Select [Line], then touch [Line
Type].
i
When the 2nd G3 Port is used:
When the optional 2nd G3 Port is
installed, two separate telephone lines
can be used for faxing.
Touch [Line Type (1)] or [Line Type (2)]
to set each line type.
3.
Select the key for the telephone
line type currently used, then
touch [Enter].
i
To select:
[DP20] - touch this when a 20 pulses
per second dial line is used.
[DP10] - touch this when a 10 pulses
per second dial line is used.
[PB] - touch this when a Touch-tone
type line is used.
majority of cases.
This will be the
Issue 1
3 - 19