Siemens HiPath 1100 User Manual page 50

Functions used during calls
Step by step
CONF:n PARTIC.
SEE CONF PTYS.?
NEXT?
REMOVE CONF PTYS.?
LEAVE LIST?
CONF:n PARTIC.
LEAVE CONF?
50
Removing a participant
The master extension can remove a slave extension at
any time, while keeping the other participants in the
conversation.
Required: A conference activated and the extension as
master.
The display shows the number of participants.
Select and confirm.
Select the participant to remove and confirm.
Select and confirm to remove the participant.
To return to the main menu
Select and confirm to return to the menu main.
Leave the conference
When you leave the conference, a new master exten-
sion will be designated automatically.
Required: A conference activated and the extension as
master.
The display shows the number of participants.
Select and confirm to leave the conference.
or
t
or Replace the handset or press the SPEAKER key
Considerations:
• S
designated as master. If the conference does not
have an extension that can be master, the confer-
ence will be ended. Except when only two external
lines are in conversation and the external-to-external
transfer feature is activated.
• If external call timer is activated and the master ex-
tension leaves the conference, the timer stays acti-
vated. When the time is up, the external lines will be
disconnected but the other members of the confer-
ence will keep talking.
telephones and external telephones cannot be
0