Functions Used During Calls; Consultation - Siemens HiPath 1100 User Manual

Functions used during calls

Step by step
CONSULT?
CONSULT
QUIT AND RET?
HELD CALL?
44
p
Enter the external number you want to call.
w s
Wait for the call to be answered. Start conversation.
At this time, the called destination receives the Caller ID
information displaying the number 3415565, even
though the call has been originated from number
3416496.
Functions used during calls

Consultation

The Consultation feature allows the extension to make
a consultation to a third party when a call is in progress.
At the same time, it prevents the first caller from listen-
ing to the conversation.
Required: A call must be in progress.
Confirm.
or
Press the "CONSULT" key
p
Enter the extension number (e.g. 11/101) or dial the ac-
cess code for an external line (e.g., 0) then the external
number.
w s
Wait for the call to be answered. Start a consultation.
To return to the first call...
Confirm.
or
w t
Wait for the consulted party to replace the handset.
If the consultation extension is busy or does not an-
swer, or if you want to return to the first call before
answering...
Confirm.
or
[1] When the handset is replaced during a consultation, the first call is
transferred to the extension that was consulted.
1