Siemens HiPath 1100 User Manual page 61

Functions used during calls
Step by step
It is also possible to configure the system so that
it is either mandatory or optional to enter a Ac-
count code at the start of the call. This setting
can be made using HiPath 1100 Manager (see
Account codes - A31003-K1160-B810-*-*) or pro-
gramming code (see Programming Manual,
A31003-K1160-B804-*-*, Account code type).
The Account code can be configured in advance
using HiPath 1100 Manager (see Account codes
- A31003-K1160-B810-*-*). If it has been config-
ured and the option to validate the Account code
is selected, only the configured codes will be ac-
cepted. If an invalid Account code is typed in, a
negative tone will sound or a message will be
displayed.
61