Nokia MEDIAMASTER 9760 C Owner's Manual page 15

FIRST TIME INSTALLATION
Normally the channel search procedure will work without any
problems. If the Setup Identifier code is wrong or you have
moved the box to another living area; after two unsuccessful en-
tries of the code you will get the menu shown below.
If the automatic search procedure failed you can manually enter
the values necessary for the search procedure. The values you
have to enter you can get from your service provider.
Use the number buttons on the remote control to enter the dif-
ferent values. If you enter a wrong digit use the to erase it. You
use the to move from one line to another.
The "." will be automatically set.
Frequency with 4 digits.
Network Number with 3 digits.
Symbol Rate with 5 digits.
Modulation: Select Modulation with the buttons.
Home Application Identifier
Service Provider Identifier
When you have entered the values, press OK to start the chan-
nel search.
GB 15